It has an energy-independent memory in which up to 10 times can be stored in advance.
When the power is turned on, the last used time is displayed and goes into standby mode.
Parameters:
Supply voltage: AC 220V or DC 12V / 0.2A. The device works with only one of the two voltages!
Output: Relay with normally open and normally closed contact - max. 5A / 240V. Only the relay contacts are displayed!
Relay contact:
- Normally open contact - NO.
- Common contact - COM.
- Normally closed contact - NC.
Relay: 15А/125V AC, 15A/24V DC, 10A/250V AC.
Four control buttons (for setting the time, start and stop).
Operating time - from 1 second to 9999 seconds.
Ten pre-stored times, with quick access to them.
Energy independent memory.
LED indicator for switched on relay (work mode).
Attention !!!
Observe all rules for safe operation with high voltage when installing the device.
This product is a boxed finished product.
Time relay from 1 second to 9999 seconds
- Brand: Hobbykit Ltd
- Product Code: 90CTB14S
- Availability: Out Of Stock
-
33.23 € (64.99 ЛВ.)
-
- 3 or more 32.20 € (62.98 ЛВ.)
- 5 or more 31.20 € (61.02 ЛВ.)
- 10 or more 29.20 € (57.11 ЛВ.)
Related Products
Cycle Time Relay - assembled
This device is a relay, working as cyclic timer (cyclic time relay). Operating mode is as follow: Work, Pause, Work, Pause etc… You can adjust working and pause time between 1 and 120 seconds or ..
7.36 € (14.39 ЛВ.)
Timer switch time relay 1 to 30 sec, min or hours Delay ON switch /with box/
How it works: When power is on, the delay time start. Upon expiry of the time, relay turns ON and remain in this position until cut off the power. By restart power supply - cycle repeat. LED..
7.62 € (14.90 ЛВ.)
Time Relay /0 to 160 seconds/ - assembled
The time relay has been designed based on a timer 555-U1 connected to the anticipating multivibrator circuit. The relay will be reset using the B2 pushbutton and will remain in anticipating mode. Push..
4.24 € (8.29 ЛВ.)